Home > Pumps, Plumbing & Hose > Pumps > General Purpose Pumps
Sort By:
Page of 1
Jabsco 115 VAC Water Puppy - 18660-0133 - 115VAC Jabsco Commercial Duty Water Puppy Jabsco Bilge/Livewell/Shower Sump/General Purpose Diaphram Pump
Jabsco 115 VAC Water Puppy - 18660-0133 - 115VAC
List Price: $379.78
Our Price: $239.99
Similar to the popular Puppy pumps but are equipped with AC electric motors. Ideal for dockside general purpose pumping and some onboard applications. Neoprene impeller. Delivers up to 3.5 GPM. The motor has replaceable brushes for extended life. It is not rated for continuous duty. Motor is 1/12 hp. Ports are 3/8 IPT internal, garden hose thread external. Use for bilge pumping, livewell circulation, washdown and general pumping requirements. For intermittent duty, motor may be reversed to empty bait tank. Pump has a dry prime suction lift of about 6 feet (2m) and a lift to 20 feet (6m) when primed.
Flow rate: 8 GPM
Self-priming from dry up to 4'.
Small bilge debris presents no problem to these bronze bodied, flexible impeller pumps.
Simple design means fewer wearing parts.
ISO 8846 Marine (Ignition protection).
ISO 8849 Marine (Bilge pump standard).
Body Materials: Bronze
Impeller: Nitrile
Seal: Lip: type
Motor type: Permanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump.
Port type: 1/2" IPT.
Adapter for 3/4" External Garden Hose thread included.
Dimensions: 3" H x 4-3/4" W x 6-7/8" L
Weight: 7 lb.
Flow rate: Nominal 16.3 Litres/min (4.3 USgallons/min)
Self-priming from dry up to 2.4m (7.8ft)
Run dry without damage.
Smooth flow.
Four piston, diaphragm pump.
Powerful heavy duty motor with thermal overload protection.
Snap-in ports.
Waterproof coating.
Meets USCG regulation 183.410 and EN ISO 8846 MARINE (Ignition Protection Standards).
Meets EN 50081-1 Electro-magnetic compatibility.
Complies with EN ISO 8849 MARINE Electric Bilge Pump.
Includes in-line pump filter.
Groco Series SPO-60 Vane Pump - SPO-60-N-12V - Non-Reversing - 12 VDC Jabsco 6050 Series Bronze 115/230 VAC Motor Pump Unit - 6050-0003
GROCO Vane Pumps are self-priming. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change.

Ignition protected motor and #316 stainless steel shaft.
Flow rate: 23 GPM, maximum head 60'; self-priming from dry up to 7.8'
Bronze construction
Nitrile impeller
316 stainless steel impeller sleeve over steel motor shaft
Replaceable wearplate
Lip type shaft seal
Ports: 1" NPT, internal
Voltage: 115/230 VAC
Motor: 3/4hp, 1725 RPM
Applications: Bait tank circulation, transfer oil, wash down and utility dock pump