|
|
|
|
|
|
|
|
|
|
|
|
|
- A Flattening Agent specially formulated for mixing with Interlux one-part finishes Toplac, Brightside Yacht Enamels and varnishes (Original, Goldspar and Schooner) to produce a variety of gloss, satin or matte effect finishes.
- For interior and exterior use.
|
- Primocon is an anticorrosive primer for underwater metal surfaces (including hulls, running gear, and the lower units of outboards and I/O’s).
- It will provide an excellent barrier to reduce pitting of the metal from galvanic corrosion. An excellent primer for antifouling paint over sanded fiberglass.
- Also suitable as a barrier/sealer coat over incompatible or unknown antifoulings.
|
- Outboard and Outdrive Aerosol Primer
- Interlux Outboard and Outdrive Aerosol Primer is formulated for use on underwater areas of aluminum outdrives and outboards, prior to application of Tri-Lux II, Tri-Lux II Aerosol or Micron 33 Aerosol.
- Outboard and Outdrive Aerosol Primer is a non bleeding, anticorrosive primer that provides an excellent barrier on metal surfaces, reducing galvanic corrosion.
Note: This item cannot be shipped via air shipping.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Epoxy-Barrierkote is a multi-purpose two-part epoxy primer for use above the waterline.
- Epoxy-Barrierkote is an excellent under coater for Perfection.
- It is used as a sanding surface to smooth rough lay-up and to resurface cracked and crazed gelcoat.
|
- Prekote® is a unique V.O.C. compliant, single package, under coater for use with Brightside® Polyurethane, Toplac, Yacht Enamels or any one-part topside finish. Microspheres are used to give Prekote® superior build and hide while improving flow and sandability. Prekote® is recommended anywhere above the true waterline where a coating is needed to provide a smooth, fair surface for overcoating with a topside enamel.
- Prekote® is available in both White (4279) and Gray (4280). The use of Prekote® Gray 4280 is recommended for use under dark colors. White (4279) and Gray (4280) may be blended for use under intermediate colors.
- Do Not Use INTERTHANE PLUS 2300 Series Polyurethane or any two-part catalyzed product over Prekote ®. Prekote must be sanded prior to overcoating with one-part topside finish
|
- Prekote® is a unique V.O.C. compliant, single package, under coater for use with Brightside® Polyurethane, Toplac, Yacht Enamels or any one-part topside finish. Microspheres are used to give Prekote® superior build and hide while improving flow and sandability. Prekote® is recommended anywhere above the true waterline where a coating is needed to provide a smooth, fair surface for overcoating with a topside enamel.
- Prekote® is available in both White (4279) and Gray (4280). The use of Prekote® Gray 4280 is recommended for use under dark colors. White (4279) and Gray (4280) may be blended for use under intermediate colors.
- Do Not Use INTERTHANE PLUS 2300 Series Polyurethane or any two-part catalyzed product over Prekote ®. Prekote must be sanded prior to overcoating with one-part topside finish.
|
|
|
