Home > Pumps, Plumbing & Hose > Valves & Seacocks
Choose a sub category:
Ball Valves Check Valves Seacocks
Shut Off Valves Y-Valves Valve Lubricants
Sort By:
Page of 1
Jabsco Quick Release Connector with 3/4" GHT Adapter - 31911-0000 Jabsco Quick Connect Hose Adapter Only 31911-0002 Groco SBV-P Series Bronze Seacocks with Side Port
Jabsco Quick Connect Hose Adapter Only 31911-0002
List Price: $41.58
Our Price: $32.43
  • Quick Release Features:
  • Exposed surface UV stabilized
  • Provides easy connection of washdown hoses
  • Plastic quick release hose connector has standard 3/4” male GHT hose connection.
  • Self termination and sealing
  • No shut-off needed
  • Mount Features:
  • Easy to install
  • Stainless steel deck plate has 1/2” BSP (British Standard Pipe) ID connection
  • Stainless steel screws
  • Minimal mounting surface required
Fits Jabsco 319111-0000 Deck Fitting (Order no. 280979).
  • Built-in check valves in hose fittings prevent leaking when disconnected.
  • No need to turn off the water pressure to install a hose.
  • Hose Adapter is threaded with 3/4” male GHT.
Two driver ports permit handle relocation.
NPT threaded side port accepts SSCV or any NPT threaded accessory.
Handle has square hole that accepts standard ratchet, helps access hard-to-reach valves, or ease actuation of hard-to-operate valves.
Full flow.
Serviceable while installed.
CB4400 bronze construction.
Stainless steel ball and stem.
ases have bonding attacment.
PTFE seats and seals.

Groco IBVF Bronze NPS to NPT Flange Adaptor Groco BB-1 Seacock Backing Block Groco PNC Series Bronze In-Line Check Valves - Male NPT
  • Patented IBVF Flanged Adaptors have been developed to address several common problems in the marine industry. Here’s what they do:
  • Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hull
  • Accept standard thru-hulls into the base and standard in-line valves on top.
  • Provides a safe and sturdy assembly when in-line valves are used as seacocks.
  • For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later.
  • Simplifies future valve replacement
  • Each size fits multiple seacock sizes.
  • Press threaded brass inserts into the hull side of the backing block into the holes that match the seacock flange.
  • Rigid 1/2" thickness provides secure installation but is flexible enough to conform to minor hull curvature.
  • Will not swell or absorb moisture.
  • Made from an environmentally friendly PVC foam specially formulated for marine applications.
  • Cast bronze pipe nipple with check valve inside to prevent backflow in plumbing systems.
  • Impozes almost zero flow restriction.
  • Requires less than 0.45 PSI to open.
  • Colored bands indicate flow direction (green to red).
  • Do not use in diesel or galoline applications.
Groco CV Series Bronze In-Line Check Valves - Female NPT Groco TVW 3 Port Bronze
  • C83600 cast bronze construction.
  • NPT threaded ports.
  • Suitable for use with diesel fuel or gasoline
  • 3-way valve operates logically - The handle points to the direction of flow. Center position is "off".
  • Handle rotates a full 180°.
  • Mount foot included.
  • Full flow.
  • Stainless steel handle and hardware.
  • PTFE seats and seals.
  • TWV-1500 size is ideal for waste systems.
  • UL listed for fuel or water.