|
|
|
|
|
|
|
|
|
|
|
- White Plastic construction.
- Quick, easy installation of antenna on 7/8" or 1" railing.
- Ratchet surface permits 360° rotation for adjustment/lay-down.
- Holds antennas up to 8' in length.
- No drilling required.
- All necessary hardware provided.
|
- Low-profile Flange Mount - nylon. Same as style 4710, but made of nylon for moderate-duty applications.
- Low-profile.
- Standard 1in-14 thread.(male).
- Nylon construction.
|
- 316 stainless steel construction.
- Lay-down handle quickly loosens the ratchet for fast, easy antenna drop.
- Features standard 1”-14 male thread mount with a hole for a Loran cable.
- Lightweight mount may be used self-supporting with an antenna up to 15’ long.
- Both mounts feature two ratchets for both up/down and side-to-side adjustments.
- Flat base for deck mounting.
- Base dimensions: 3½” x 2½”.
|
|
|
|
|
|
|
|
|
|
|
|
|
- White nylon. Lay-down handle quickly loosens the ratchet for fast, easy antenna drop.
- Standard 1”-14 male thread mount.
- Features both up/down and side-to-side adjustments.
- Flat base for deck mounting.
- Base dimensions: 3-9/16” L x 2½” W x 4-11/16” H
|
- 1in-14 Thread Pipe Adapter. Slip this adapter onto a 1-inch diameter pipe for a standard 1-in-thread male fitting.
- Attaches easily with set screws.
- Standard 1in-14 thread.(male).
- Stainless steel.
|
- Enables antenna to Lift-n-Lay with positive snap action.
- Leveling plate provided for mounting to a sloping deck.
- Standard 1in-14 thread.(male).
- Has 3/8in-24 thread brass insert.
- Handles antennas up to 8ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
- Insulated stand-off bracket of white molded plastic. For use with Styles 81-S and 407 Swivel Mounts (each sold separately) and antennas of 1in (using insert provided) or 1½ in diameter. Includes a new 1-1/8in insert!
- Corrosion resistant.
- Easy-open for quick laydown.
|
This Rail Mount Adjustable Antenna Base features a lever action lay-down handle that makes lowering antenna quick and easy for passing under bridges, storage, and trailering. Accepts any standard antenna with 1”-14 threads (NOT recommended for whips over 8’). Can be mounted on either 7/8” and 1” vertical or horizontal rails. Constructed of UV resistant injection molded nylon.
A: 3-3/16" B: 3-9/16" Fits: 7/8" - 1" Tubing
|
Heavy-duty Swivel Mount. Versatile four-way action fits almost any mounting location and permits antenna laydown in desired direction. For deck or side mounting when used with a stand-off bracket (sold separately). Bolt holes: 5/16" dia.; 3" x 1-1/2" on center. Standard 1"-14 thread (male).
|
|