• Designed specifically for fresh and brackish water applications, Trac’s Descaler® can safely be used within engines, cooling towers, boilers, or just about any other system re-circulating water.
• TRAC’s Descaler® will not harm gaskets, seals, plastics, or any metals commonly found in water systems. Will not harm most materials including plastic, metal, rubber, fiberglass, vinyl, wood or paint.

• Designed specifically for fresh and brackish water applications, Trac’s Descaler® can safely be used within engines, cooling towers, boilers, or just about any other system re-circulating water.
• TRAC’s Descaler® will not harm gaskets, seals, plastics, or any metals commonly found in water systems. Will not harm most materials including plastic, metal, rubber, fiberglass, vinyl, wood or paint.
• One gallon concentrate makes 5 to 10 gallons of ready-to-use solution.

• Immersion: Isolate the tanks, fill the entire system and let stand.
• Circulation: Inject PSR® into tank, mix, run faucets for 2 minutes every 15 minutes until the tank is empty. Fill the system and rinse.

• A safe, non-toxic, and biodegradable marine growth remover.
• Specifically formulated to meet and industry wide need for a fast, safe and cost effective alternative to mechanical cleaning of water cooled equipment.
• Can safely be recirculated through the sea water cooling systems, dissolving barnacles, zebra mussels, calcium, rust, lime and all other minerals.
• Most applications can be completed within 4 hours!

• A safe, non-toxic, and biodegradable marine growth remover.
• Specifically formulated to meet and industry wide need for a fast, safe and cost effective alternative to mechanical cleaning of water cooled equipment.
• Can safely be recirculated through the sea water cooling systems, dissolving barnacles, zebra mussels, calcium, rust, lime and all other minerals.
• Most applications can be completed within 4 hours!

• A safe, non-toxic, and biodegradable marine growth remover.
• Specifically formulated to meet and industry wide need for a fast, safe and cost effective alternative to mechanical cleaning of water cooled equipment.
• Can safely be recirculated through the sea water cooling systems, dissolving barnacles, zebra mussels, calcium, rust, lime and all other minerals.
• Most applications can be completed within 4 hours!

A powerful tool packaged into a five-gallon bucket, Port-O-Flush Jr.® provides portability and versatility while still efficiently handling small to medium size engines, heat exchangers, air conditioning & refrigeration systems. Designed with the do-it-yourself boat owner in mind, TRAC’s Port-O-Flush Jr.® is extremely simple to use. Tasks which normally cost you days of down time can now be confidently preformed within an afternoon.

• High density polyethylene five-gallon container with lid
• Anti-corrosive, epoxy encapsulate, centrifuge submersible pump
• Tough schedule 80 PVC fittings
• Supply and discharge isolation valves
• (2) 10’ 5/8 nylon reinforced hose with fittings
• (2) ½” and (2) ¾” male NPT nylon adaptors