|
|
|
|
|
|
|
|
|
|
|
|
|
- Recommended for marine products and other equipment exposed to the elements.
- Has excellent resistance to water, rust and corrosion.
- Remains clear, doesn’t peel and is harmless to painted surfaces.
THIS ITEM IS AVAILABLE FOR STORE PICK-UP ONLY.
WE DO NOT SHIP THIS ITEM.
|
• Forms a corrosion-proof insulating film. • Film stays flexible – will not crack or craze. • Seals out salt air and moisture. • Provides long-term protection under all weather conditions. • Easily removed with CRC Cleaner & Degreaser or petroleum solvents.
THIS ITEM AVAILABLE FOR STORE PICK-UP ONLY. WE DO NOT SHIP THIS ITEM.
|
- 8-1/2” long wood handle. Two rows of stiff bristles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- General purpose chlorinated rubber type product used as a primer on metal surfaces or as a tiecoat between different antifouling products.
- Can be used over Metal Primer 6455/044 as an excellent and easy to use system on underwater running gear.
- Use Epoxy Thinner 97.
|
- Rustlock adheres to all ferous metals including steel, cast iron, galvanized and stainless.
- Dries rapidly allowing for multiple coats in a day.
|
- Rustlock adheres to all ferous metals including steel, cast iron, galvanized and stainless.
- Dries rapidly allowing for multiple coats in a day.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Metal Primer 6455/044 is a two component product which is a self-etching type wash primer for use only on bare metals such as steel, stainless steel, cast iron, copper, bronze, galvanized steel, lead and aluminum.
- It forms an excellent adhesive bond to metal hulls, keels, centerboards, and other underwater running gear.
- Can be used either above or below the water.
- Can be overcoated with either epoxy primer, topside enamels, or antifouling paint.
|
- Primocon is an anticorrosive primer for underwater metal surfaces (including hulls, running gear, and the lower units of outboards and I/O’s).
- It will provide an excellent barrier to reduce pitting of the metal from galvanic corrosion. An excellent primer for antifouling paint over sanded fiberglass.
- Also suitable as a barrier/sealer coat over incompatible or unknown antifoulings.
|
- Outboard and Outdrive Aerosol Primer
- Interlux Outboard and Outdrive Aerosol Primer is formulated for use on underwater areas of aluminum outdrives and outboards, prior to application of Tri-Lux II, Tri-Lux II Aerosol or Micron 33 Aerosol.
- Outboard and Outdrive Aerosol Primer is a non bleeding, anticorrosive primer that provides an excellent barrier on metal surfaces, reducing galvanic corrosion.
Note: This item cannot be shipped via air shipping.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Epoxy-Barrierkote is a multi-purpose two-part epoxy primer for use above the waterline.
- Epoxy-Barrierkote is an excellent under coater for Perfection.
- It is used as a sanding surface to smooth rough lay-up and to resurface cracked and crazed gelcoat.
|
- Prekote® is a unique V.O.C. compliant, single package, under coater for use with Brightside® Polyurethane, Toplac, Yacht Enamels or any one-part topside finish. Microspheres are used to give Prekote® superior build and hide while improving flow and sandability. Prekote® is recommended anywhere above the true waterline where a coating is needed to provide a smooth, fair surface for overcoating with a topside enamel.
- Prekote® is available in both White (4279) and Gray (4280). The use of Prekote® Gray 4280 is recommended for use under dark colors. White (4279) and Gray (4280) may be blended for use under intermediate colors.
- Do Not Use INTERTHANE PLUS 2300 Series Polyurethane or any two-part catalyzed product over Prekote ®. Prekote must be sanded prior to overcoating with one-part topside finish
|
- Prekote® is a unique V.O.C. compliant, single package, under coater for use with Brightside® Polyurethane, Toplac, Yacht Enamels or any one-part topside finish. Microspheres are used to give Prekote® superior build and hide while improving flow and sandability. Prekote® is recommended anywhere above the true waterline where a coating is needed to provide a smooth, fair surface for overcoating with a topside enamel.
- Prekote® is available in both White (4279) and Gray (4280). The use of Prekote® Gray 4280 is recommended for use under dark colors. White (4279) and Gray (4280) may be blended for use under intermediate colors.
- Do Not Use INTERTHANE PLUS 2300 Series Polyurethane or any two-part catalyzed product over Prekote ®. Prekote must be sanded prior to overcoating with one-part topside finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Stops rust and prepares rusted surfaces for painting. Contains phosphoric acid.
THIS ITEM AVAILABLE FOR STORE PICK-UP ONLY.
WE DO NOT SHIP THIS PRODUCT.
|
Click on product image to view and order available models.
|
- The Flitz 5” Large Buff Ball is the ideal all-around buffer, perfect for polishing and buffing any surface, even those hard-to-reach spots.
- Try it at home, in the garage, and anywhere you need to buff and polish.
- The Flitz Large Buff Ball is perfectly sized for buffing:
Wheels & Rims Aluminum Running Boards Cars & Motorcycles Antiques Patio Furniture Painted Surfaces, Stainless Steel, Aluminum, Brass, and Other Metal Surfaces - The Flitz Buff Ball easily buffs away:
Brake Dust Scuff Marks Light Scratches Chalking Tarnish Oxidation Pitting & Corrosion - Unlike traditional foam buffers that burn, scorch and tear, the Flitz Buff Ball features soft Italian viscose fibers that can be repeatedly washed and re-used.
- Patented Hex-shaft provides a secure, no-slip hold on any 3/8” drill or air tool
- Self-cooling fabric is safe for any drill up to 2500 RPM
- Hundreds of soft felt “fingers” won’t scratch surfaces
- Easily and safely buff hard-to-reach areas on any surface indoors or out with the Flitz Large Buff Ball.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Space Age Protection For Smooth Surfaces
- RejeX is a thin-film polymer coating designed to provide a high-release surface.
- This very thin film – less than a micron thick – reduces the adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. that can leave stains.
- Can be applied to windshields to repel rain.
- It’s easy to apply and produces a deep, lustrous shine that lasts for months.
- It is very important to allow RejeX to cure 12 hours after the haze has been wiped off.
- Protects and beautifies painted metal, glass, acrylic, gel coat, fiberglass, glossy plastic and polished metal surfaces. Not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches.
|
- Space Age Protection For Smooth Surfaces
- RejeX is a thin-film polymer coating designed to provide a high-release surface.
- This very thin film – less than a micron thick – reduces the adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. that can leave stains.
- Can be applied to windshields to repel rain.
- It’s easy to apply and produces a deep, lustrous shine that lasts for months.
- It is very important to allow RejeX to cure 12 hours after the haze has been wiped off.
- Protects and beautifies painted metal, glass, acrylic, gel coat, fiberglass, glossy plastic and polished metal surfaces. Not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches.
|
- Magic wadding polish that cleans and polishes silver, gold, brass, steel, copper, aluminum, chromium plate and all metals.
- Removes rust and leaves no deposit in the crevices.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Shines metal better than new.
- Cleans, waxes, and polishes in one step.
- Removes and prevents pitting.
- Non-abrasive, no acids.
|
- Use on all metals; stainless steel, copper, brass, aluminum, chrome, gold, silver, not for plated objects.
|
- Use on all metals; stainless steel, copper, brass, aluminum, chrome, gold, silver, not for plated objects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Use on all metals; stainless steel, copper, brass, aluminum, chrome, gold, silver, not for plated objects.
|
- Cleans and shines stainless steel, aluminum, pewter, brass, bronze, copper.
|
- IMAR™ Yacht Metals Polish (#503) is formulated to clean, polish and protect all metals in the marine environment.
- For beauty today and protection tomorrow, there is none better.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- For pontoons and aluminum boats.
- Designed to remove oxidation, water spots and other weathering effects from bare or painted aluminum surfaces, and restore a lustrous appearance.
- Do not use on anodized aluminum. In 18 oz. cans of paste.
|
- Secret formula balances a brilliant shine with easy use for aluminum wheels and parts, brass, alloys and accessories.
- Application is just a matter of a clean cloth and a little elbow grease.
- Mothers® Mag & Aluminum polish is strong enough to put a shine to the most neglected metals and gentle enough to use on a regular basis.
|
- This easy-to-apply cleaner and polish is ideally suited for stainless steel, chrome, laminated plastics and aluminum surfaces.
- With a high-gloss formula, it wipes clean with no streaks or build-up, resists fingerprints and masks surface blemishes.
- Pleasant lime fragrance.
- Contains no petroleum distillates.
THIS ITEM AVAILABLE FOR STORE PICK-UP ONLY.
WE DO NOT SHIP THIS PRODUCT.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Felt type material designed to clean all types of marine metals.
- Removes oxidation, light rust and corrosion on stainless, anodized aluminum and chrome.
- Simply remove small portion of felt from can.
- Rub metal surface until dirt and tarnish is removed.
- Wipe clean with a cotton cloth. Note: do not use on lacquered or plated surfaces.
|
- Cleans and shines chrome and stainless surfaces.
- Protects against pitting, discoloration, and staining.
- Resists salt water spray.
- Bonds to metal for long lasting protection. No hard rubbing.
- Easy to use. Leaves a dazzling shine.
|
- Flitz Stainless Steel and Chrome Cleaner with degreasing agents is a revolutionary new formula that safely cleans and protects polished and brushed stainless steel, chrome, enamel and porcelain.
|
|
|
