|
|
|
|
|
|
|
|
|
|
|
- 50/50 mix, all purpose resin for fiberglassing, molding, laminating, repairing or where superior adhesion is required.
- Used on aluminum, steel, fiberglass, close-grained hardwoods and styrofoam.
- Packaged in kits of equal portions of resin and hardener.
|
- Complete set of material for Gel Coat repairs for minor surface damage on boats.
- Repairs scratches, gouges, cracks, etc. Mixes or matches to any desired color.
- Kit contains: 1/4 pt. Gel-Paste with hardener, six 1/4 oz. tubes of all primary pigment colors, mixing cup and sticks, cleaning solvent, special release film and instructions.
|
- Repair fiberglass boats, bathtubs, shower stalls and hot tubs.
- Easy permanent repairs on hairline cracks, small scratches and chips in fiberglass.
- This one part formula does not need a catalyst. Just fill in the crack, let is set and scrape off the excess with the enclosed spreader.
- It is just that easy.
|
|
|
|
|
|
|
|
|
|
|
|
|
- Repair fiberglass boats, bathtubs, shower stalls and hot tubs.
- Easy permanent repairs on hairline cracks, small scratches and chips in fiberglass.
- This one part formula does not need a catalyst. Just fill in the crack, let is set and scrape off the excess with the enclosed spreader.
- It is just that easy.
|
- Multiple use foam curing to a semi-rigid, closed cell mass.
- Can be used on a car, boat or house for caulking, sealing and filling.
- Will adhere to metal, fiberglass and wood.
- Waterproof. Cures in 20 minutes.
- Can be cut, sanded or painted. By the absorption of moisture, expands approximately 50% during cure.
|
- For steps, porches, walkways, diving boards, docks, boat decks and tools.
- Skid-No-More is a textured non-skid coating, formulated with acrylic latex and ground rubber.
- It is non-abrasive, pliable and resilient to the touch.
- It can be applied to most surfaces with a paintbrush, this napped roller or squeegee.
- Skid-No-More comes is a medium gray color, but can be tinted to a desired color with Evercoat Color Agents.
|
|
|
|
|
|
|
|
|
|
|
|
|
- Ultra-smooth surfacing putty for finishing off coarse and roughly sanded body filler.
- Also applies over fiberglass and bare metal.
- Applies “thin”.
- Won’t shrink.
- Has greater fill capacity.
- Saves up to 2-1/2 hours over conventional glazing putties.
- Cures in 20 minutes.
- Hardener included.
|
- The professional’s choice conventional autobody filler.
- Features flexible white plastic formulation with creme hardener.
- Goes on smoothly, easily and quickly which saves time, trouble and money in all body repairs.
- Hardener included.
|
- Super light weight auto-body filler that applies without sagging.
- Lets you file or sand in minutes to seven days later.
- Requires less sanding to reduce dust and clogging.
- Feather edges superbly.
- Cures under humid conditions.
- Hardener included.
|
|
|
|
|
|
|
|
|
|
|
- America’s Cup White Marine Filler properly applied will quickly and easily repair permanently – breaks, splits, holes, ruptures or other imperfections caused by accidents or normal wear and tear.
- It can be mixed with universal pigments to match nearly any color.
- Uses cream hardener (provided) for superior performance.
|
- Gel coat quality in a paste. Repair larger areas of gel coat scratches, nicks and gouges
- Mix paste with coloring agents to match original color
- Neutral paste will make permanent repairs on gel coat and fiberglass panels
- Will also adhere to most woods and metal.
|
|