|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optic coupler lock. Universal trailer coupler lock, durable cast body, will fit most 1-7/8”, 2”, and 2-5/16” couplers. Yellow body increases visibility.
|
1-7/8” and 2” universal.
|
Same key fits all three locks. Two sizes of Receiver Locks: 5/8” and 1/2”. Coupler latch lock for 7/8” width.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass construction offers maximum corrosion resistance Hardened steel tube with a laminated brass lock body. Marine brass shackle. 4-pin tumbler cylinder. Vinyl covered for maximum corrosion resistance. Locks outboard motors up to 40 HP.
|
Stainless steel Barbell lock fits 5/8” receiver openings. Push to Lock locking mechanism - push lock body onto pin firmly and remove key. 10,000 lb. load rating. Weather Tough seal and water tight cap protects lock from moisture and dirt. 4-pin tumbler mechanism resists picking. K1 key blank.
|
Six locking postions from 9/16” to 2-3/4”. Water tight cap protects lock from moisture and dirt. Rekeyable cylinder for keyed alike convenience.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Push to Lock™ locking mechanism- push lock body onto pin firmly and remove key. 1/2” Pin is Rated for Class I/II and 5/8” Pin is Rated for Class III/IV. Weather Tough® seal and water tight cap protects lock from moisture and dirt. 4-pin tumbler mechanism resists picking. K1 Key Blank.
|
- Push to Lock™ locking mechanism- push lock body onto pin firmly and remove key.
- 1/2” Pin is Rated for Class I/II and 5/8” Pin is Rated for Class III/IV.
- Weather Tough® seal and water tight cap protects lock from moisture and dirt.
- 4-pin tumbler mechanism resists picking.
- K1 Key Blank.
|
Click on product image to view and order available models.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 digit dialing. Brass. A: 5/16” B: 1” C: 1”
|
Fully shrouded design minimizes shackle exposure and protects against bolt cutter attacks. 2-3/4” (70mm) wide stainless steel lock body resists corrosion. Hardened steel shackle for extra cut resistance. Double deadbolt locking for superior pry resistance. 4-pin cylinder helps prevent picking. Key retaining feature ensures padlock is not left unlocked.
|
Massively armored against bolt cutters and saws.
Recommended for trailer hitches, bicycles and security hasps.
3/4” armored shackle guard blocks bolt cutters from shackle.
Revolving case-hardened steel shackle sleeve is highly resistant to cutting and sawing.
Precision pin tumbler mechanism and exclusive rustproofing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to lock the outboard onto the transom of the boat. Simply replace one of the mounting nuts with a McGard locking nut. A free-spinning collar turns if attacked by gripping tools, protecting you against costly outboard motor theft and the resulting inconvenience. For Johnson/Evinrude Outboards For engines 40 HP and larger. 1/2” x 13 threads. Single lock.
|
Designed to lock the outboard onto the transom of the boat. Simply replace one of the mounting nuts with a McGard locking nut. A free-spinning collar turns if attacked by gripping tools, protecting you against costly outboard motor theft and the resulting inconvenience. Yamaha 40 HP and larger (2 stroke) Yamaha 30 HP and larger (4 stroke) Honda 40 HP and larger Suzuki 25 - 140 HP (2005 and newer)
M12 x 1.25 |
Click on product image to view and order available models.
|
|
|
|
|
|
|
|
|
|
|
|
|
Click on product image to view and order available models.
|
|
|
