|
|
|
|
|
|
|
|
|
|
|
|
|
|
Click on product image to view and order available models.
|
Repairs most scuppers.
Kit contains: 2 each 1-5/8” - 1-7/8” & 2-1/4” flappers, keepers and stainless fasteners.
|
Mounts over 1” to 1-1/4” drain tubes.
Grooved inside to fit over drain flange.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quickly drains decks.
For decks above waterline.
Maximum drainage for larger boats.
Easily clears debris.
Fits 2” x 5-1/2” hole.
|
Replaces worn out flapper scuppers
70% more drainage than competitive models
Twist off for easy cleaning
Retrofits all hole patterns Seal is slotted to fit over 1-1/4” motorwell tubes.
Meets all ABYC standards.
|
Tough thermoplastic flapper. Seals tight under water
pressure. Easy to install over drain tubes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Click on product image to view and order available models.
|
Molded white polymer. Flush mount for use with hose. For use when discharge is above the waterline. Insert prevents passage of large objects without restricting water flow.
Hose size: 1-1/2”.
Maximum hull thickness: 1-3/4”.
Flange O.D.: 2-3/4”; I.D.: 1-1/2”.
|
For surface mount applications.
Molded white polymer with soft black rubber flapper.
Thru-hull and mounting hardware not included.
O.D. Flange: 2-7/8”.
Screw size: #6
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Small vent for deck or bulkhead mount. Raised fins reduce clogging when used as a scupper. Perfect for venting areas under fixed seating too. Color: Black
Hole Cut = 2-1/4” (5.7 cm) Dia.
Over All = 4” (10.1 cm) x 2.5” (6.4 cm)
|
High strength glass-reinforced Marelon. I-1/2" hose barb. 2-3/4" O.D. Includes nut..
|
- Chrome Plated Brass
- Much more attractive than bronze and will not turn green
- Replaces older bronze fittings with universal hole pattern
- Salt Water & UV Resistant
- Fits 1" Hole
- Flange diameter is 2"
- Plug diameter is 1/2" NPT Plug has square top for wrench or socket wrench
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Molded black ABS plastic with threaded receiver. Molded retaining strap. Includes rubber plug washer and attaching screws.
|
Provides bilge drainage when hauling out. Nut removes with wrench or pliers. Machined, tapered pipe threads ensure watertight plug fit. 3/8” neck depth. Three countersunk holes for #8 screws.
|
Fitted with neoprene seal, will not deteriorate and crack with age.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Should be mounted in a 1” I.D. hole with two stainless steel fasteners and positioned with gap in thread at lowest point. Black with gasket. Hole cut: 1” Dimensions overall: 1-1/4” x 2”
|
Flush vent design may be used for a floor drain or for ventilation of a speaker enclosure or locker. Diameter 5-1/2”.
|
Provides maximum sink, shower or deck drainage. Flush head allows complete drainage. Equipped with screen to protect drain. Complete assembly includes nut. Fits marine sanitation hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides maximum sink, shower or deck drainage. Flush head allows complete drainage. Equipped with screen to protect drain. Complete assembly includes nut. Fits marine sanitation hose.
|
Injection molded nylon.
| Mfg. No. | A | B | Fastener | | 520500-1 | 2-13/16" | 1-7/8" | #6 FH |
|
Provides maximum sink, shower or deck drainage. Flush head allows complete drainage. Equipped with screen to protect drain. Complete assembly includes nut. Fits marine sanitation hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides maximum sink, shower or deck drainage. Flush head allows complete drainage. Equipped with screen to protect drain. Complete assembly includes nut. Fits marine sanitation hose.
|
Provides maximum sink, shower or deck drainage. Flush head allows complete drainage. Equipped with screen to protect drain. Complete assembly includes nut. Fits marine sanitation hose.
|
|
|
