Home > Painting & Refinishing > Pettit Paints > Primers & Surface Preparations
Click on image to see ordering information.
Sort By:
Page of 1
Pettit 6627 Metal Primer - 6627Q - Quart Pettit 6980G Rustlock Steel Primer Gallon Pettit 6980 Rustlock Steel Primer Quart
Pettit 6627 Metal Primer - 6627Q - Quart
List Price: $49.23
Our Price: $44.99
Pettit 6980G Rustlock Steel Primer Gallon
List Price: $157.38
Our Price: $109.99
Pettit 6980 Rustlock Steel Primer Quart
List Price: $54.48
Our Price: $42.99
  • General purpose chlorinated rubber type product used as a primer on metal surfaces or as a tiecoat between different antifouling products.
  • Can be used over Metal Primer 6455/044 as an excellent and easy to use system on underwater running gear.
  • Use Epoxy Thinner 97.
  • Rustlock adheres to all ferous metals including steel, cast iron, galvanized and stainless.
  • Dries rapidly allowing for multiple coats in a day.
  • Rustlock adheres to all ferous metals including steel, cast iron, galvanized and stainless.
  • Dries rapidly allowing for multiple coats in a day.
Pettit 6455/44G Metal Primer Pack Gallon Kit Pettit 6455/44 Metal Primer Pack Quart Kit Pettit 6998 Skipsand Primer Quart
Pettit 6455/44G Metal Primer Pack Gallon Kit
List Price: $170.26
Our Price: $129.99
Pettit 6455/44 Metal Primer Pack Quart Kit
List Price: $71.55
Our Price: $59.99
Pettit 6998 Skipsand Primer Quart
List Price: $63.33
Our Price: $49.99
  • Metal Primer 6455/044 is a two component product which is a self-etching type wash primer for use only on bare metals such as steel, stainless steel, cast iron, copper, bronze, galvanized steel, lead and aluminum.
  • It forms an excellent adhesive bond to metal hulls, keels, centerboards, and other underwater running gear.
  • Can be used either above or below the water.
  • Can be overcoated with either epoxy primer, topside enamels, or antifouling paint.
  • Metal Primer 6455/044 is a two component product which is a self-etching type wash primer for use only on bare metals such as steel, stainless steel, cast iron, copper, bronze, galvanized steel, lead and aluminum.
  • It forms an excellent adhesive bond to metal hulls, keels, centerboards, and other underwater running gear.
  • Can be used either above or below the water.
  • Can be overcoated with either epoxy primer, topside enamels, or antifouling paint.
  • Eliminates the need to sand before applying anti-fouling paint.
  • Recommended over vinylester and other blister resistant gelcoats where sanding is forbidden.
  • Improved recoatability versus other no-sand primers.
Pettit 4700/4701G Hi-Build Primer Kit Gallon Kit Pettit 4700/4701Q Hi-Build Primer Kit Quart Kit Pettit 1792 Zinc Coat Barnacle Barrier 16 oz. net weight
Pettit 4700/4701G Hi-Build Primer Kit Gallon Kit
List Price: $158.30
Our Price: $109.99
Pettit 4700/4701Q Hi-Build Primer Kit Quart Kit
List Price: $65.90
Our Price: $44.99
  • High Build Epoxy Primer
  • Easier application due to less coats.
  • Reduces water absorption in fiberglass hulls.
  • Excellent for steel, aluminum, and other metals.
  • Pettit Protect High Build Epoxy Primer 4700/4701 is a heavy duty, two component epoxy-polyamide coating for use all over your boat. Excellent for the prevention and repair of osmotic blisters.
  • Equally effective for the protection of underwater metals from corrosion.
  • High Build Epoxy Primer
  • Easier application due to less coats.
  • Reduces water absorption in fiberglass hulls.
  • Excellent for steel, aluminum, and other metals.
  • Pettit Protect High Build Epoxy Primer 4700/4701 is a heavy duty, two component epoxy-polyamide coating for use all over your boat. Excellent for the prevention and repair of osmotic blisters.
  • Equally effective for the protection of underwater metals from corrosion.
  • Zinc Coat Barnacle Barrier 1792 provides easy to use aerosol spray protection for bare metals including steel, stainless steel, cast iron, copper, bronze, galvanized steel, and lead. It forms an excellent bond to underwater metals and running gear, and inhibits corrosion on these surfaces.
  • Zinc Coat Barnacle Barrier’s smooth, hard surface will self-clean in service, and can be used above or below the waterline.
  • The dried film of Zinc Coat contains 93% pure zinc.
  • Net weight 16 oz.
Pettit 95 Fiberglass Dewaxer Quart Interlux YPA984Q Primocon Gray Quart Interlux YPA985 Primocon Aerosol Gray 24 oz.
Pettit 95 Fiberglass Dewaxer Quart
List Price: $32.78
Our Price: $24.99
Interlux YPA984Q Primocon Gray Quart
List Price: $45.69
Our Price: $37.99
Interlux YPA985 Primocon Aerosol Gray 24 oz.
List Price: $35.29
Our Price: $31.99
  • For removing mold release and cleaning fiberglass surfaces prior to painting.
  • Primocon is an anticorrosive primer for underwater metal surfaces (including hulls, running gear, and the lower units of outboards and I/O’s).
  • It will provide an excellent barrier to reduce pitting of the metal from galvanic corrosion. An excellent primer for antifouling paint over sanded fiberglass.
  • Also suitable as a barrier/sealer coat over incompatible or unknown antifoulings.
  • Outboard and Outdrive Aerosol Primer  
  • Interlux Outboard and Outdrive Aerosol Primer is formulated for use on underwater areas of aluminum outdrives and outboards, prior to application of Tri-Lux II, Tri-Lux II Aerosol or Micron 33 Aerosol.
  • Outboard and Outdrive Aerosol Primer is a non bleeding, anticorrosive primer that provides an excellent barrier on metal surfaces, reducing galvanic corrosion.
Note: This item cannot be shipped via air shipping.
Interlux 404/414Q Epoxy-Barrierkote® Quart Interlux 4279Q Pre-Kote Primer White Quart Interlux 4280Q Pre-Kote Primer Gray Quart
Interlux 404/414Q Epoxy-Barrierkote Quart
List Price: $60.49
Our Price: $51.99
Interlux 4279Q Pre-Kote Primer White Quart
List Price: $44.99
Our Price: $38.99
Interlux 4280Q Pre-Kote Primer Gray Quart
List Price: $44.99
Our Price: $39.99
  • Epoxy-Barrierkote is a multi-purpose two-part epoxy primer for use above the waterline.
  • Epoxy-Barrierkote is an excellent under coater for Perfection.
  • It is used as a sanding surface to smooth rough lay-up and to resurface cracked and crazed gelcoat.
  • Prekote® is a unique V.O.C. compliant, single package, under coater for use with Brightside® Polyurethane, Toplac, Yacht Enamels or any one-part topside finish. Microspheres are used to give Prekote® superior build and hide while improving flow and sandability. Prekote® is recommended anywhere above the true waterline where a coating is needed to provide a smooth, fair surface for overcoating with a topside enamel.
  • Prekote® is available in both White (4279) and Gray (4280). The use of Prekote® Gray 4280 is recommended for use under dark colors. White (4279) and Gray (4280) may be blended for use under intermediate colors.
  • Do Not Use INTERTHANE PLUS 2300 Series Polyurethane or any two-part catalyzed product over Prekote ®. Prekote must be sanded prior to overcoating with one-part topside finish
  • Prekote® is a unique V.O.C. compliant, single package, under coater for use with Brightside® Polyurethane, Toplac, Yacht Enamels or any one-part topside finish. Microspheres are used to give Prekote® superior build and hide while improving flow and sandability. Prekote® is recommended anywhere above the true waterline where a coating is needed to provide a smooth, fair surface for overcoating with a topside enamel.
  • Prekote® is available in both White (4279) and Gray (4280). The use of Prekote® Gray 4280 is recommended for use under dark colors. White (4279) and Gray (4280) may be blended for use under intermediate colors.
  • Do Not Use INTERTHANE PLUS 2300 Series Polyurethane or any two-part catalyzed product over Prekote ®. Prekote must be sanded prior to overcoating with one-part topside finish.