|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Charge Pro Portables offer a versatile charging solution that you can take with you in your car, truck, boat, motor cycle or anywhere else you need power. Even your classic car can be charged with the 6V mode. The portables come with two sets of cables-one with ring terminals and one with alligator clips. - Charge flooded, AGM and Gel batteries
- Microprocessor controlled for accurate charging
- Intuitive operation
- IP65 weatherproof housing
- Designed for harsh marine and industrial environments - moisture, salt, shock and vibration tested
- Meets global industry standards including UL, CE, CSA, ABYC, California efficiency regulations (CEC)
- 4 ft DC cable connects to 2 ft lead with ring terminals or 2 ft lead with alligator clips (both included)
- Models: 6/12V, 1.1 Amp and 4.3 Amp
|
ChargePro onboard chargers have the same housing and mounting dimensions as our traditional Charge Pro Guest chargers with a number of performance enhancements. - Charge flooded and AGM batteries
- Microprocessor controlled for accurate charging
- Universal input 120/230V input for go-anywhere freedom
- Intuitive operation
- Sense-Send technology senses the power needs of each battery and sends correct charge
- Isolated outputs
- Outputs can be put in series or parallel for higher voltage or current
- Completely sealed, epoxy filled
- IP68 waterproof
- Designed for harsh marine and industrial environments - moisture, salt, shock and vibration tested
- Non corroding housing for ultimate reliability
- Meet global industry standards including UL, CE, CSA, ABYC, California efficiency regulations (CEC)
- Footprint same as former Charge Pro Guest Chargers
- ConnectCharge Plug for easy assembly to inlet (Item #150CCI) with no wiring
|
ChargePro onboard chargers have the same housing and mounting dimensions as our traditional Charge Pro Guest chargers with a number of performance enhancements. - Charge flooded and AGM batteries
- Microprocessor controlled for accurate charging
- Universal input 120/230V input for go-anywhere freedom
- Intuitive operation
- Isolated outputs
- Outputs can be put in series or parallel for higher voltage or current
- Completely sealed, epoxy filled
- IP68 waterproof
- Designed for harsh marine and industrial environments - moisture, salt, shock and vibration tested
- Non corroding housing for ultimate reliability
- Meet global industry standards including UL, CSA, ABYC, California efficiency regulations (CEC)
- Footprint same as former Charge Pro Guest Chargers
- ConnectCharge Plug for easy assembly to inlet (Item #150CCI) with no wiring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• 10/2 amp
• 10 amp rate.
• Reverse polarity protection.
• Fully automatic
• Easy to read meter with LED light that signals when fully charged.
• Charges 12-volt batteries
• 2 Amp trickle/maintenance charge turns on and off ass needed.
• 2 year manufacturer’s limited warranty.
Automatic circuit assures full charge, even on deep cycle batteries. Output shuts off completely at full charge, but turns back on as needed.
|
For 12 Volt Marine, Deep-Cycle, Automotive, AGM and Gel Cell Batteries.
15 Amp Fast Charge - charger monitors battery condition and adjusts charge rate downward to prevent battery damage; for car, truck, marine, RV, farm equipment, AGM, gel cell and deep- cycle batteries
10 Amp Fast Charge - self-adjusting charge rate for everyday charging needs and keeping your battery in peak condition
2 Amp Slow Charge - for charging small batteries and maintaining large ones; charges motorcycle, ATV, snowmobile and lawn tractor batteries
Easy-To-Read Digital Meter
System Test - helps diagnose problems with battery and charging system*
|
economical 12 volt charger can be used two ways: manual or fully automatic.
No overcharging worries when in fully automatic mode.
10 amp fast charge – for everyday charging needs. Charges in 3 to 5 hours.
2 amp trickle charge – charges a small 12 volt battery in 2 to 12 hours
LED light – signals Fully Charged.
CSA Certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Click on product image to view and order available models.
|
Click on product image to view and order available models.
|
Marinco on-board charger inlets make battery charging through an on-board battery charger safer and more convenient. Inlets mount on the boat exterior and are hard-wired directly to the charger. To use, just open the flip lid cover and plug an extension cord into the inlet. All hatches remain closed and locked throughout the charging cycle for added security. - Mounts easily to fiberglass and aluminum hulls
- Perma-Lock terminals and color coded wire entrance holes make wiring a snap
- UV resistant housing/cap
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Click on product image to view and order available models.
|
Click on product image to view and order available models.
|
|
|
